High Torque 70kg Metal Gear Digital Servo - 180° Angle for RC Cars, Boats, Robots | Perfect for Off-Road Vehicles, Marine Models & DIY Robotics Projects

How to Use: 1. Install the steering gear to the steering gear base first, without installing the steering gear arm or steering gear protection. Only fix the steering gear. Then connect the steering gear to the receiver, which is usually divided into three wires from the CH1 or ST socket. Bottom line, VCC, signal/PWN. 2. After the steering gear is fixed, turn on the remote control, and then turn on the ESC after setting, and then the steering gear will stop at a fixed position. 3. Without turning off the remote control and the steering gear, install the steering gear protection or steering gear arm to the steering gear output gear. Specification: Item Type: Metal Gear Servo Color: Blue Bearing: 2BB Frequency: 330hz Engine: Nuclear Dead Zone/Neutral Point: 4μs/1500μs RC Angle: 90-120° 500μs-2500μs: 180° Cable Length: 260mm/JR Weight: Approx.230g/8.1oz Material: Plastic+Aluminum Alloy+Stainless Steel Size: Approx. 65.7x30x57mm/2.6x1.2x2.2in Operating Speed (6.0V/8.4V): 0.20"/0.16"/60° Stall Torque (6.0V/8.4V): 56/70kg.cm Applicable: for Remote Control Cars, Boats, Robots Package List: 1 x Servo 2 x Steering Gear Arm 2 x Screw Note: 1. Please allow 0‑1 inch error due to manual measurement. Thanks for your understanding. 2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.