Anti Spark Switch for Motorcycles - Intelligent Heat Dissipation & Spark Prevention - Perfect for Electric Bikes, Scooters, and DIY Robotics Projects

Feature:1. Sliding switch mode, push to turn on, stand still for three minutes, automatically shut down, save power and worry.2. Widely used, can be installed in various products, smaller in size, lighter in weight, suitable for motorcycles, robots, etc.3. Anodized aluminum alloy heat sink, slotted designed, enhanced heat dissipation capacity.4. Add silicone to fix LED and other bottom wires and heat shrinkable tubing.5. Small size, easy to carry and store, convenient to use and with good performance.Specification:Item Type: Anti Spark SwitchMaterial: PCB board + aviation aluminum alloy heat sink + thermal silicaModel: Anti spark switch intelligent version 200AHardware: V2.2Maximum Voltage: 13S (60V)Continuous Current: 150AMaximum Current: 200AMosfet: NVMFS5C628NLsLED Button Diameter: Approx. 12mm / 0.5inCable Length: Approx. 250mm / 9.8inPCB Thickness: 4 layers x 3oz copper = 12oz copperPCB Size: Approx. 40 x 32mm / 1.6 x 1.3inEnhanced Functions: 1. High-side switch ≥It is safer when used with multiple ESCs and other devices.2. Surge current limit. The RC delay limits the inrush current to a safe level.dV/dt is ~100V/s (for power electronic equipment, this is very slow, fast is 50,000,000V/s). With an output capacitance of 6,000 uF, this is an inrush current of 600 mA.3. Smart power on/offStart from scratch. It has a blanking timer of 12 seconds after closing. During this period, it can still be opened by a switch.Turn off automatically. It will automatically turn off after 20 minutes. The output voltage must change at least 500mV in any three-second interval to reset the shutdown timer.4. Support momentary button. Hold down for 0.3s to open, 1s to