Lightweight Compact Electronic Speed Controller for Electric Skateboards, Robots & Scooters - Durable & Reliable Performance for Commuting & Outdoor Adventures

Feature:1. Small and exquisite, widely used, can be installed in various products, smaller in size and lighter in weight, suitable for scooters, robots and other products.2. Flipsky ESC is based on the VESC open source project and is compatible with VESC software.3. Flipsky ESC is a highly modifiable electronic speed controller designed for DIY electric skate‑board conversion.4. Flipsky ESC allows you to use a sensorless motor to achieve a smooth start, while the traditional RC ESC may not be able to start. It also provides a powerful, reliable and progressive electric brake.5. The maximum continuous current can be as high as 50A, with temperature protection and current limit protection, supporting multiple control modes.Spec:Condition: 100% Brand New Item Type: Electronic Speed ControlColor: As Pictures Shown Material: PCB Board + Aviation Aluminum Alloy Heat Sink + Thermal Silica Gel + Mos TubeModel: V4.12 ESC Standard ConfigurationHardware: V4.12EPRM: 60000Firmware: V3.40 (Retain the Latest Firmware Version)PCB: 4 LayersPCB Size: Approx. 40 x 60mm / 1.57 x 2.36inCurrent: Continuous 50A / 240A, It Depends on the Installation and Ambient Temperature Around the DeviceVoltage: 8-60V (Can Be Used for 3S to 12S Lipo, the Voltage Must Not Exceed 60V!)Recommend 10s Battery(not included)Bec: [email protected] Type: Internal Driver SupportTime: Software CalibrationMotor Control Interface: PPM Signal (RC Servo), Analog, UART, I2CUSB or CAN Bus.Cut-Off Voltage: ProgrammableFrequency: PWM InputGovernor: NoWeight: Approx. 80g / 0.18lbFsesc4.12 Size: Approx. 110x40x20mm / 4.3 x 1.6 x 0.8inProgramming Card: NoReverse: YesMotor Wire: 12AWGPower Cord: 12AWGPackage L