High Torque Coreless Motor DS04-NFC 360° Continuous Rotation Servo - Geared DC Motor for RC Robots, DIY Robotics, and Smart Home Automation Projects
Free shipping on all orders over $50
7-15 days international
16 people viewing this product right now!
30-day free returns
Secure checkout
21935547
Description
Specification:Item Type: 360 Degree Continuous Rotation Servo MotorMaterial: Metal + PlasticColor: BlackProduct Size: Approx. 40.8*20*39.5mm / 1.6*0.8*1.6inchWeight: Approx. 52g / 1.8ozTorque: 5.5kg/cm (at 4.8V)Uses: Aircraft models, Car models, Robots, etc.Working Voltage: 4.8V-6VOperating Temperature: 0°C - 60°CCurrent Usage: <1000mAWiring Method:As can be seen from the figure, the steering gear has three lines: red line, black line, and white line.1. The red line is the positive pole of the power supply, connected to the positive pole of the 5V-6V DC power supply.2. Black wire is connected to the negative pole of the power supply.3. White line signal input, which is the 50HZ signal input line mentioned above.Package list:1 x 360 Degree Continuous Rotation Servo Motor4 x Rocker Arm4 x Rocker Arm Cap4 x Rat-tail Screw4 x Flat Tail Screw1 x Black Flush Tail ScrewNotes:1. The actual product color may deviate from the photo due to light.2. There may be a slight deviation in the measurement of product.
Features
Easy to Install: Can be used to make model airplanes/cars/robots. Smooth edge design, easy installation, good performance, stable and sturdy.
Compact and Space Saving: Reasonable size, light weight, easy to carry and use. High quality, fine workmanship, rust-proof, durable and practical.
Features: This servo is equipped with a neutral adjustment potentiometer (can only be seen by peeling off the shell and circuit board). We can set a 1.5ms high pulse to see if the servo stops turning. If it doesn't stop spinning, we keep adjusting the pot until it stops.
Tip: The signal terminal needs to input a 50HZ square wave, and then the duration of the high-level pulse is used to control the signal period, which can control the speed, forward and reverse rotation, and stall. The duration of the high level corresponds to a speed.
Speed: When the high level is 1ms-1.5ms, the servo rotates forward (the speed is the fastest at 1ms, the higher the lower the lower, the servo stops when it reaches 1.5ms). When the high level is 1.5-2ms, the servo will reverse (the servo will stop rotating when it reaches 1.5ms, and the closer the duration is to 2ms, the faster it will be. The reverse rotation speed reaches the fastest 2ms)
